OVERVIEW
The RoboMaster S1 is a game-changing educational robot built to unlock the potential in every learner. Inspired by DJI’s annual RoboMaster robotics competition, the S1 provides users with an in-depth understanding of science, math, physics, programming, and more through captivating gameplay modes and intelligent features.
IN THE BOX
SPECS
RoboMaster S1
Camera
-
FOV
-
120°
-
Max Still Photo Resolution
-
2560×1440
-
Max Video Resolution
-
FHD: 1080/30fps
HD: 720/30fps
-
Max Video Bitrate
-
16 Mbps
-
Photo Format
-
JPEG
-
Video Format
-
MP4
-
Sensor
-
CMOS 1/4″; Effective pixels: 5 MP
-
Operating Temperature Range
-
-10 to 40 °C (14 to 104 °F)
Narrow Infrared Units
-
Effective Range [1]
-
6 m (in indoor lighting conditions)
-
Effective Area
-
Varies from 10° to 40°
Effective area decreases as distance from the target increases.
Wide Infrared Units
-
Effective Range [1]
-
3 m (in indoor lighting conditions)
-
Effective Width
-
360° (in indoor lighting conditions)
Hit Detector
-
Detection Requirements
-
For the Hit Detector to be activated, the following conditions must be met: Gel bead diameter ≥ 6mm, launching speed ≥20m/s, and the angle between the hit direction and hit detector plane is no less than 45°.
-
Maximum Detection Frequency
-
15 Hz
S1
-
Weight
-
Approx. 3.3 kg
-
Dimensions
-
320×240×270 mm (length × width × height)
-
Chassis Speed Range
-
0-3.5 m/s (forward)
0-2.5 m/s (backward)
0-2.8 m/s (sideways)
-
Max Chassis Rotational Speed
-
600°/s
M3508I Brushless Motor
-
Max Rotational Speed
-
1000 rpm
-
Max Torque
-
0.25N*m
-
Max Output Power
-
19 W
-
Operating Temperature Range
-
-10 to 40 °C (14 to 104 °F)
-
Driver
-
FOC
-
Control Method
-
Closed-loop speed control
-
Protection
-
Overvoltage protection
Overtemperature protection
Soft-start
Short-circuit protection
Chip and sensor anomaly detection
Blaster
-
Controllable Launching Frequency
-
1-8/s
-
Max Launching Frequency
-
10/s
-
Initial Launching Speed
-
Approx. 26 m/s
-
Average Load
-
Approx. 430
Gimbal
-
Controllable Range
-
Pitch: -20° to +35°
Yaw: ±250°
-
Mechanical Range
-
Pitch: -24° to +41°
Yaw: ±270°
-
Max Rotational Speed
-
540°/s
-
Vibration Control Precision (on the flat surface and with the Blaster idle)
-
±0.02°
Intelligent Controller
-
Latency (depending on environmental conditions and mobile device)
-
Connection via Wi-Fi: 80-100ms
Connection via Router: 100-120ms
(unobstructed, free of interference)
-
Live View Quality
-
720p/30fps
-
Max Live View Bitrate
-
6 Mbps
-
Operating Frequency
-
2.4 GHz, 5.1 GHz, 5.8 GHz
-
Operating Mode
-
Connection via Wi-Fi, Connection via Router
-
Max Transmission Distance (unobstructed, free of interference)
-
Connection via Wi-Fi:
FCC, 2.4 GHz 140 m, 5.8 GHz 90 m
CE, 2.4 GHz 140 m, 5.8 GHz 70 m
SRRC, 2.4 GHz 130 m, 5.8 GHz 130 m
MIC, 2.4 GHz 140 mConnection via Router:
FCC, 2.4 GHz 180 m, 5.8 GHz 300 m
CE, 2.4 GHz 180 m, 5.1 GHz 100 m
SRRC, 2.4 GHz 180 m, 5.8 GHz 300 m
MIC, 2.4 GHz 170 m, 5.1 GHz 180 m
-
Transmission Power (EIRP)
-
2.400-2.4835 GHz
FCC: ≤30 dBm
SRRC: ≤20 dBm
MIC: ≤20 dBm5.170-5.25 GHz
FCC: ≤30 dBm
SRRC: ≤23 dBm
MIC: ≤23 dBm5.725-5.850 GHz
FCC: ≤30dBm
SRRC: ≤30dBm
-
Transmission Standard
-
IEEE802.11a/b/g/n
Intelligent Battery
-
Capacity
-
2400 mAh
-
Nominal Charging Voltage
-
10.8 V
-
Maximum Charging Voltage
-
12.6 V
-
Battery Type
-
LiPo 3S
-
Energy
-
25.92 Wh
-
Weight
-
169 g
-
Operating Temperature Range
-
-10 to 40 °C (14 to 104 °F)
-
Charging Temperature Range
-
5 to 40 °C (41 to 104 °F)
-
Maximum Charging Power
-
29 W
-
Battery Life in Use
-
35 minutes (measured at a constant speed of 2 m/s on a flat surface)
-
Battery Life on Standby
-
Approx. 100 minutes
Charger
-
Input
-
100-240 V, 50-60Hz, 1A
-
Output
-
Port: 12.6 V=0.8A or 12.6 V=2.2A
-
Voltage
-
12.6 V
-
Rated Voltage
-
28 W
Gel Bead
-
Diameter
-
5.9-6.8 mm [2]
-
Weight
-
0.12-0.17 g [2]
App
-
App
-
RoboMaster
-
iOS
-
iOS 9.0 or later
-
Android
-
Android 5.0 or later
Router
-
Recommended Routers
-
TP-Link TL-WDR8600; TP-Link TL-WDR5640 (China)
TP-Link Archer C7; NETGEAR X6S (International)
-
Recommended outdoor power supply solution for routers
-
Laptop Power Bank (match the input power of the router)
microSD card
-
Supported SD Cards
-
Supports microSD cards with a capacity up to 64GB
Others
-
Notes
-
1. Use of the infrared units will be affected in outdoor or infrared-intensive environment.
-
2. The gel beads will swell to a usable size after being soaked in water for four hours.
VIDEOS





