DJI DOCK
For Roads Less Traveled
DJI Dock serves as a charging station and a base station for the DJI Matrice 30 drones. It enables automated charging and data transfer, allowing the drones to perform autonomous operations with minimal human intervention.
A New Take on Remote Work
Complete Cloud Control
With FlightHub 2, unlock full DJI Dock functionality from the cloud. Schedule missions, create and edit flight routes, and manage data collected.
Real-time Awareness
Live stream in high-definition at any time to check on your DJI Dock or your drone.
Mission Planning
Plan complex flight routes remotely through FlightHub 2.
Flight Plan Management
Edit, manage, and push flight routes to your DJI Docks and
keep track of flight progress and results.
Media Management and Storage
Review the geo-tagged pictures, videos, maps, and panoramas collected by your drones. Data collected by your drones can be automatically uploaded and stored for later use.
One-Stop Operation and Maintenance
Monitor the health and status of your DJI Docks and drones, all remotely from the cloud.
Fast Charging, Fast Turnaround
Fast charge and take off thanks to TEC air conditioning that cools the drone batteries, enabling charging from 10-90% in just 25 minutes*.
Day or Night, Rain or Shine
DJI Docks are built to withstand the elements, so you don't have to.
Matrice 30 Series Dock Version
Non-stop Ops
The M30 Series Dock Version delivers flagship-level performance with maximum wind resistance of 15 m/s and an IP55 rating.
Wide Area Coverage
Fully charged, the M30 flies for 40 minutes 9 and can conduct missions and inspections up to 7 km
from the Dock.
Target Details at your Fingertips
The M30 Series Dock Version integrates wide, zoom, and thermal cameras (M30T only) with a laser rangefinder, which together can capture the aerial data you need, when you need it.
Simple Setup
One DJI Dock weighs less than 105 kg and less than 1 square-meter footprint.
Setup only requires ground fixation, access to power and internet, and quick configuration via the DJI RC Plus remote controller.
Modular Maintenance
The modular design of core components simplifies maintenance.
DJI DOCK BUNDLE
M30 Dock Version
M30T Dock Version
1. Measured in environments without transmission or signal interference, and wind speeds <4 m/s, where the drone has a flight speed of 15 m/s and reserves 20% battery as a safety buffer for landing.
2. Measured at a temperature of 25℃. As temperature increases, battery cooling time will increase and lengthen downtime.
3. Will be supported in Q2, 2023.
4. To ensure operation safety, DJI Docks will enter standby mode when the temperature goes below -20° C (-4° F), and resume flight missions when the temperate goes back up above that.
5. AC surge protection capacity is 40kA (8/20μs waveform), and meets EN/IEC 61643-11 TYPE 2 protection levels. RJ45 surge protection capacity is 1.5ka (8/20μs waveform), these meet the CATEGORY C protection level of EN/IEC 61643-21. Surge protection capability depends on the capacity and reliability of grounding. To minimize the risk of surges, please make sure that grounding is done properly during installation.
6. Each DJI Dock has a built-in backup battery that can provide power for 5 hours and ensure the drone can safely return and land in the event of an emergency power outage.
7. Measured in a windless, sand-free, and non-erosive laboratory environment in normal temperatures. Depending on environmental conditions and the frequency of DJI Dock operations, it is recommended that maintenance be conducted every six months or less.
8. Takeoff and landing can withstand wind speeds up to 12 m/s.
9. Measured in windless conditions with the drone flying at a uniform 10 m/s. Actual flight duration may vary depending on the environment, flight mode, and accessories.