From a paddock boundary to the final spray pass, drone crop spraying follows a clear field workflow. Here is how growers and operators plan the job, manage the application and keep work moving throughout the day.
How does a crop spraying drone work?
On an Australian farm, every crop protection job starts with a treatment area and an application plan. A spraying drone carries the spray mixture in a tank beneath the aircraft. Pumps move the liquid through an atomising system, which delivers droplets as the drone travels along a planned flight route.
The operator establishes the application rate, spray width, flight speed and height for the crop and job. The drone then follows mapped passes across the nominated paddock, with the operator supervising the aircraft and the application.
Identify the crop, treatment area, boundaries and obstacles.
Match spray volume, flow rate and working width to the treatment.
Follow the route, refill between flights and record the job.
DJI Agras models bring together application systems, positioning and flight assistance for this type of work. The DJI Agras spraying drone range shows the equipment and specifications available across the T100, T70P, T50 and T25P.
Planning the job around the paddock
The first conversation is about the crop and the treatment. The grower identifies the paddock, the issue being treated and the required application window. The operator then plans the flight around the shape of the field and the work involved. For the checks that happen before take-off, see what happens before a spraying drone starts work.
Marking out the treatment area
Paddock boundaries, access tracks, trees, sheds, powerlines and waterways are recorded before the first flight. Where a property has several separate treatment areas, each area is mapped into the work plan.
Working from the approved spray programme
The approved chemical product label or relevant permit sets the permitted use and application rate. The grower’s agronomist provides a crop-specific spray recommendation covering the target, treatment timing and application rate within those requirements. The operator uses this information to set the product rate per hectare, spray volume and aircraft settings before the job starts.
These are the details that turn a drone flight into an organised crop protection application.
How spray coverage is managed
Good coverage begins with the right application settings. Flow rate controls how much liquid the aircraft delivers. Droplet settings, flight speed, working height and effective spray width determine how that liquid is distributed across the crop.
Spray flow, droplets and working width
The operator sets the flow and droplet system to suit the product and target. The working width is calibrated for the application, then used to plan the distance between flight passes. Each pass follows the mapped route and delivers the intended spray volume.
Crop height and field conditions
Wheat at flag leaf is a different spray job from an orchard canopy or a grazing paddock. Crop structure, terrain and obstacles shape the route and the spray settings. DJI Agras terrain-following and sensing functions support aircraft positioning as the work progresses.
Weather is monitored as part of the operation. Wind and other spray-drift conditions are checked against the chemical label and permit requirements throughout the job.
What happens on a spraying day?
Before the aircraft takes off, the crew prepares a filling point near the work area. Spray mixture, clean water, charging equipment and replacement batteries are organised around the day's paddocks.
Once the operator has checked the job plan and equipment, the drone begins its first programmed passes. At the end of the flight, it returns to the service point for refilling and a battery change. The work continues along the planned route.
Refilling and batteries
Tank capacity and application volume determine the number of refills. Battery changes and charging are planned alongside filling so the next flight can begin with the aircraft ready for work. On larger properties, access between paddocks also forms part of the daily schedule.
The crew keeps track of the treated area and the work completed as the spraying programme progresses.
Where drone crop spraying fits on Australian farms
Wheat and other broadacre crops
Growers use agricultural drones for approved crop protection applications, including fungicides, herbicides and insecticides. The treatment is timed around the crop stage and the pest or disease being managed.
Orchards and horticulture
In orchards, the flight route takes account of tree rows, canopy shape and changes in terrain. The application system is configured for the crop and target coverage.
Pastures and grazing paddocks
For suitable weed-control work, operators map the treatment areas and plan flights around the locations requiring spraying. Separate patches across a property can be organised into the same day's programme. EE Group's weed detection and targeted spraying workflow explains how field mapping can guide treatment of identified weed areas.
Drone spraying in a Deniliquin wheat crop
At a family farm near Deniliquin in southern New South Wales, two DJI Agras T100 drones formed part of the wheat crop protection programme. The farm covers approximately 2,500 hectares, including 1,500 hectares of wheat.
Flag-leaf fungicide application
According to the published EE Group case study, the two aircraft completed the flag-leaf fungicide treatment over 235 hectares in seven hours. The operation shows how drone spraying fits into the farm's seasonal crop protection programme.
Figures are the farm's reported results for this particular operation, not a standard output rate for every property.
Read the Deniliquin wheat case studyFor model-specific information about the aircraft used in that job, the DJI Agras T100 product page sets out the spraying system and technical specifications.
Recording the work
After each treatment, the operator records the completed area, application details and relevant job information. Flight records support the work log, while spray records capture the product, application rate, date, weather and other details required for the operation.
These records give the grower a clear history of treatments across the paddocks and support planning for later crop protection work.
Questions growers ask about drone spraying
How does the operator know which part of my paddock to spray?
How is the correct spray rate applied?
What happens when the drone needs more spray liquid?
What should I have ready before the operator arrives?
How long does a drone spraying job take?
Further reading
Explore the equipment behind these operations, or see another application from EE Group's Australian agriculture content.
For an overview of the wider uses of farm drones, read what agricultural drones can do on Australian farms. Growers new to the equipment can also start with the practical guide to agricultural drones for beginners.